Robustel M1000 Pro V2 User Guide - Manual (Page 46)

Robustel GoRugged M1000 Pro V2 User Guide
RT_UG_M1000 Pro V2_v.2.0.0
19.11.2013 45 / 69
Confidential
Management
Enable @ M2M
Platform
When click to enable this checkbox, gateway will works as TCP Client site and
be managed via RobustLink (Robustel centralized management and
administration system).
Disable
Data Forwarding
Enable @ M2M
Platform
When enable this feature, all serial data from gateway will be forwarded to
M2M Platform, will not forward to address that configured in “Connection” ->
“Socket Application”. At the same time, “Connection” -> “Socket Application”
can’t be configured.
When disable this feature, all serial data from gateway will not be forwarded to
M2M Platform, will forward to address that configured in “”Connection” ->
“Socket Application”. M2M Platform just acts as a remote management
platform this time.
Disable
Address @ M2M
Platform
Enter IP address or domain of M2M Platform. Null
Port @ M2M
Platform
Enter the port number of M2M Platform. Null
Password @ M2M
Platform Enter password in this item, which shall be the same as the password set in
M2M Platform.
Null
Device ID @ M2M
Platform This item let you know the default single ID of M1000 Pro V2, can’t be
configured.
N/A
3.2.17 Status
This tab allows user to check the running status of M1000 Pro V2.