Robustel R3000 User Guide User Manual
Page 59
Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 58 / 131
Confidential
Made Good and Ground Speed（VTG）+ Recommended Minimum Specific
GPS/TRANSIT Data（RMC）.
NMEA RMC: Recommended Minimum Specific GPS/TRANSIT Data（RMC）.
RS232 Report Interval
Set the interval to report GPS status to RS232 serial port of router.
1
Index @ GPS Server
Setting
Show the index of GPS Server.
Null
Server Name @ GPS
Server Setting
Show the type of GPS Server.
Null
Add
Click “Add” to add GPS Server.
Report Type
Select from “NMEA GGA+VTG”, “NMEA GGA+VTG+RMC” and “NMEA
RMC”.
NMEA GGA+VTG: Global Positioning System Fix Data（GGA）+ Track Made
Good and Ground Speed（VTG）.
NMEA GGA+VTG+RMC: Global Positioning System Fix Data（GGA）+ Track
Made Good and Ground Speed（VTG）+ Recommended Minimum Specific
GPS/TRANSIT Data（RMC）.
NMEA RMC: Recommended Minimum Specific GPS/TRANSIT Data（RMC）.
NMEA
GGA+VTG
Report Interval
Set the interval to report GPS status to GPS Server.
0
Socket Type
Select from “TCP Server”, “TCP Client” and “UDP”.
TCP Client: Router works as TCP client, initiate TCP connection to TCP
server (GPS Server), the server address supports both IP and domain name.
TCP Server: Router works as TCP server (GPS Server), listening for
connection request from TCP client.
UDP: Router works as UDP client.
TCP Server
Local Port @ TCP Server
Set the local port number of TCP server.
0
Server Address @ TCP
Client
Set the Server address of TCP server.
Null
Server Port @ TCP Client
Set the remote Port number of TCP server.
Note: router supports up to 3 GPS servers, supports re-connect when the
TCP connection is down.
0
This section allows users to check the GPS status.