Robustel R3000 User Guide - Manual (Page 33)

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 32 / 131
Confidential
Link Management
Item Description Default
Primary Interface
Selected from “Cellular”, “Eth0”, “WiFi”.
1. Cellular: Select to make cellular as the primary WAN link.
2. Eth0: Select to make Eth0 as the primary WAN link.
3. WiFi: Select to make WiFi as the primary WAN link.
Cellular
Backup Interface
Selected from “None”, “Eth0”, “WiFi”.
1. None: Do not select backup interface.
2. Cellular: Select Cellular as the backup WAN link.
3. Eth0: Select Eth0 as the backup WAN link.
4. WiFi: Select WiFi as the backup WAN link.
None
ICMP Detection Primary
Server Router will ping this primary address/domain name to check that if the
current connectivity is active.
Null
ICMP Detection
Secondary Server
Router will ping this secondary address/domain name to check that if the
current connectivity is active.
Null
ICMP Detection Interval Set the ping interval. Null
ICMP Detection Timeout Set the ping timeout. 30
ICMP Detection Retries
If Router ping the preset address/domain name time out continuously for Max
Retries time, it will consider that the connection has been lost.
3
Reset The Interface
Enable to reset the cellular/ETH0 interface after the max ICMP detection
retries.
3
3.11 Configuration -> Cellular WAN
This section allows users to set the Cellular WAN and the related parameters.
Note: This section will not be displayed if you select “Eth0 Only” in “Configuration”->”Link Management”->”WAN