Robustel R3000 User Guide - Manual (Page 130)

Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 129 / 131
Confidential
ICMP detection interval : 30 seconds
ICMP detection timeout : 3 seconds
ICMP detection retries : 3
reset the interface : no
*********************************************
R3000 # configure
R3000 (config) # set eth0
ethernet interface type: WAN
type select:
1. Static IP
2. DHCP
3. PPP0E
->please select mode (1-3) [1]:
->IP address [192.168.0.1]:58.1.1.1 //set IP address for eth0
->Netmask [255.255.255.0]:255.0.0.0
->gateway [192.168.0.254]:58.1.1.254 //set gateway for eth0
->mtu value (1024-1500)[1500]:
->input primary DNS [192.168.0.254]:58.1.1.254 //set dns for eth0
->input secondary DNS [0.0.0.0]:
this parameter will be take effect when reboot!
really want to modify[yes]:
R3000 (config) # end
R3000# write //save current configuration
Building configuration...
OK
R3000 # reload
! Reboot the system? 'yes' or 'no': yes //reload to take effect
Example 5: CLI for Cellular dialup
R3000> enable
Password: *****
R3000#
R3000# show link-management
*********************************************
wan link : Cellular Only // now “Cellular Only” as wan-link
ICMP primary server : 8.8.8.8
ICMP second server : 8.8.8.4
ICMP detection interval : 30 seconds