Robustel R3000 User Guide User Manual
Page 40
Robustel GoRugged R3000 User Guide
RT_UG_R3000_v.2.0.0 17.01.2014 39 / 131
Confidential
Eth0@Ethernet
Item
Description
Default
Ethernet Interface Type
Eth0 can work under two different kinds of mode: LAN and WAN.
LAN
Enable Bridge @ LAN
Interface
Enable to make Eth0 works under bridge mode with Eth1. Eth0 and
Eth1 will have the same IP address under this mode.
Enable
IP Address, Netmask,
MTU, Media Type@ LAN
Interface
Set the IP address, Netmask, MTU and Media Type of Eth0. These
parameters will be un-configurable if you enable Bridge.
Null
Multiple IP Address @
LAN Interface
Assign multiple IP addresses for Eth0.
Null
Enable DHCP Server @
DHCP Server
Enable to make router can lease IP address to DHCP clients which
connect to Eth0.
Disable
IP Pool Start, IP Pool End
@ DHCP Server
Define the beginning (IP Pool Start) and end (IP Pool End) of the pool of
IP addresses which will lease to DHCP clients.
Null
Netmask @ DHCP Server
Define the Netmask which the DHCP clients will obtain from DHCP
server.
Null
Lease Time @ DHCP
Server(min)
Define the time which the client can use the IP address which obtained
from DHCP server.
60
Primary/Secondary
DNS Server @ DHCP
Server
Define the primary/secondary DNS Server which the DHCP clients will
obtain from DHCP server.
Null
Windows Name Server @
DHCP Server
Define the WINS Server which the DHCP clients will obtain from DHCP
server.
Null