RKI Instruments GX-2009 Data Logger Management Program - Manual (Page 76)

76 • Changing GX-2009 Instrument Parameters
6. Enter the password and click the Continue button. The
password when the software is first installed is “rki”. The
password is case sensitive. See “Changing the Password”
on page 63 for instructions to change the password if
desired.
7. When the password has been entered and the Continue
button clicked, the Delete History window will appear asking
you to confirm that you want to delete the most recent
calibration or bump test information for the selected
instrument.
8. If you want to delete the calibration or bump test information,
click Yes. The information will be deleted by the program.
If you do not want to delete the calibration or bump test
information, click No and the operation will be cancelled.
Changing GX-2009 Instrument Parameters
To make changes to parameters stored in the GX-2009, use the
GX-2009’s Data Logger Management Program’s Set Window.
Follow the steps below to make these changes.
1. Launch the GX-2009 Data Logger Management Program.
2. If the Automatic Download selection box is selected,
deselect it.
3. Connect a GX-2009 to the program. See “Downloading Data
from the GX-2009” on page 23, instruction 1 through
instruction 3, to connect an instrument to the program.
4. Once the connection is made, the Complete Download,
Figure 61: Delete History Window