RKI Instruments GX-2009 Data Logger Management Program - Manual (Page 24)

24 • Downloading Data from the GX-2009
IrDA adapter cable as shown in Figure 12 below, aligning the
infrared port on the side of the GX-2009 with the infrared port
on the cable.
3. Press and hold the POWER
MODE button on the GX-2009
until you hear a beep, then
release it. The GX-2009 will
begin its power up sequence. If
a successful connection
between the GX-2009 and the
computer occurs, the Connect
light in the Download window
turns green after a few
seconds and “Connection Successful.” displays in the
Download area of the Download window. The Windows
®
icon tray will indicate that a wireless connection is in effect.
4. If you selected Automatic Download, the downloading
process begins automatically after a successful connection
is made.
If Automatic Download is not selected, the Complete
Download, Instrument Information, and Power Off Download
To Computer
USB Port
Infrared Port
Cable's Infrared Port
GX-2009
Sensor Diffusion Port, 4X
Figure 12: Aligning the GX-2009 with the Cable Infrared Receiver
Figure 13: Connection
Message