RKI Instruments GX-2009 Data Logger Management Program - Manual (Page 67)

Viewing, Printing, and Deleting Data in the Last Calibration Window • 67
Effects of Bump Test Function Parameter Setting on
Appearance of Last Calibration Window
The setting of the Bump Test Function instrument parameter has
an effect on the appearance of the Last Calibration Window.
This instrument parameter can be set using the GX-2009 User
Setup Program. The factory setting is Off.
If the Bump Test Function parameter is set to Off for every
instrument that has been downloaded to the GX-2009 Data
Logger Management Program using the Complete Download or
Instrument Information download buttons, the Last Calibration
Window will appear as shown in the screen below. The screen is
shown with the Need Calibration option selected. The Bump
Test portion of this window is not shown
Figure 52: Last Calibration Window: Bump Test Function Off