RKI Instruments GX-2009 Data Logger Management Program - Manual (Page 69)

Viewing, Printing, and Deleting Data in the Last Calibration Window • 69
Operator’s Manual.
Viewing and Printing Last Calibration Data
Open the Last Calibration Window by clicking Last Calibration
along the right side of the program window. When you open the
Last Calibration Window the first time after launching the
program, it will open with the Need Calibration/Need Bump Test
view options selected. There are three view options in the Last
Calibration window: Need Calibration/Need Bump Test,
Calibration Date/Bump Test Date, and Calibration Record/Bump
Test Record.
Need Calibration/Need Bump Test Option
Selecting this option shows the last calibration date, last bump
test date, and the last download date for the GX-2009s that are
due for calibration or bump testing. The calibration data appears
at the top half of the screen while the bump test data appears in
the bottom half of the screen.
NOTE: The calibration time limit value, the number of days after
a calibration that a new calibration is due, is saved in
the GX-2009 but it is only accessible with the GX-2009
User Setup Program. If the calibration time limit is
changed in the GX-2009 using the User Setup Program,
the new calibration time limit value will not be known by
the program until the GX-2009 is downloaded.