RKI Instruments GX-2009 Data Logger Management Program - Manual (Page 48)

48 • Viewing, Printing, Exporting, and Deleting Data in the Data Window
• In table format, the interval trend data is shown as the
average gas readings over the user defined interval trend
time. So if the data logging session started at 4:13:38 PM
and the interval time is set to 1 minute, then the readings
logged at 4:14:38 PM are the average reading for each
channel over that one minute period.
• Events are displayed on the screen under the channel in
which they occur and with the time of the event. Events
are displayed whether they occurred at scheduled log
times or in between them. Events include gas alarms such
as a warning condition, trouble conditions such as a low
sensor failure, and an indication that the unit is returning to
“normal” condition after an alarm has been reset using the
Figure 32: Interval Trend Data in Table Format
Click to see
Click to save data to a file
Click to show
Select table or
graph view
Click to see Click to print data
condensed data
session summary
events only
Click to return to
Data Window