RKI Instruments GX-2009 Data Logger Management Program - Manual (Page 23)

Downloading Data from the GX-2009 • 23
Downloading Data from the
GX-2009
You have the option of downloading data manually or
automatically. If you want to download data using the automatic
download feature, click the Automatic Download selection box in
the Download Window before attempting to download data from
the GX-2009. Remember that if Automatic Download is
selected, the Instrument Information Window will remain blank
and the GX-2009 will turn off automatically after the data has
been downloaded. If you want the data in the GX-2009 to be
cleared automatically after an automatic download, select the
Automatic Data Removal box. The Automatic Data Removal box
is only available for selection if the Automatic Download box is
selected.
To download data from a GX-2009:
1. Launch the GX-2009 Data Logger Management Program.
The Download Window displays. When the program comes
up and no instrument is connected, the Download
Commands are not selectable.
2. Place the GX-2009 within an inch or two of the infrared port
on your computer aligning the infrared port on the top of the
GX-2009 with the infrared port on your computer.
If your computer does not have a built in infrared port, place
the GX-2009 within an inch or two of the infrared port on the
Figure 11: Automatic Download Selection Box
Click here for
automatic
downloads