Retsch AS 200 jet - Manual (Page 31)

Operating the machine
31
Pos : 9. 41 /0020 Übersc hrift en/1 .1 Ü bersc hriften/ 1. 1 Ü berschrif ten BDA/11Betri ebs modi @ 7 \mod_1386851520343_9. doc x @ 53623 @ 2 @ 1
5.12 Operating modes
Pos : 9. 42 /0005 RET SCH Bedi enungs anleit ung en Kapitels ammlungen/ AS200J et /0007 AS200Jet Bedienung/ AS200j et M odul Betri ebs modi @ 7\ mod_1386769949365_9.doc x @ 53496 @ 2444 @ 1
You can select the following operating modes using the menu navigation (C1):
5.12.1.1 Manual
If this function has been set, all parameters and functions can be retrieved and
changed at any time. This is also possible while sieving.
5.12.1.2 Program 01 to 09
In programs 01 to 09 the previously set parameters such as sieve duration, speed,
vacuum (only with connected automatic suction force adjustment) and Open Mesh
can be saved in a memory.
5.12.1.3 Quick Start
Under the Quick Start menu point, as with a program you can save previously set
parameters such as sieve duration, speed, vacuum (only with connected automatic
suction force adjustment) and Open Mesh in a memory.
The Quick Start sieving can also be started directly using
the Quick Start button (G).
–
The Quick Start button has no function if you are in a settings menu.
Fig. 2: Quick Start button
5.12.1.4 Basic settings
In this settings menu, you can perform the following device settings:
–
Vacuum
– Languages
– Brightness
– Date
– Time
– Signal tone
– Interface
– Service
G