MacDon FD70 for Combine Operators - Manual (Page 30)

SECTION 7. HEADER ATTACHMENT / DETACHMENT
Form 169006
28
Revision D
7.1.2 Flighting Extensions
Flighting extension kits may have been supplied
with your header to improve feeding in certain
crops such as rice. Installation instructions are
included with the kits.
They are not recommended in cereal crops.
APPLICABLE COMBINES: All except New
Holland CR960, 9060, 970, 9070, and 9080.
If necessary, remove auger flighting extensions
as follows:
a. Remove access cover (A).
b. Remove eight bolts (B), washers, and nuts that
secure flighting extension (C) to auger and
remove extension.
c. Repeat for other flighting extension.
d. Re-install access cover (A).
7.1.3 Stripper Bars
Stripper bar kits may have been supplied with
your header to improve feeding in certain crops
such as rice. Installation instructions are included
with the kits.
They are not recommended in cereal crops.
APPLICABLE COMBINES: All except New
Holland CR960, 9060, 970, 9070, and 9080.
If necessary, remove auger stripper bars as
follows:
a. Remove four bolts (D) and nuts securing bars (E)
to adapter frame and remove bars.
b. Repeat for opposite set of stripper bars.
A
C
B
D
E