MacDon FD70 for Combine Operators - Manual (Page 185)

SECTION 10. MAINTENANCE AND SERVICING
Form 169006
183
Revision D
f. Remove nuts, screws (G), and straps (H) along
draper joint.
g. Pull draper from deck.
h. Install new draper over drive roller (J) with
chevron cleat (K) pointing to front of adapter, and
ensuring draper guides fit in drive roller grooves
(L).
i. Pull draper along bottom of adapter deck and
over draper supports (M).
j. Connect draper with straps (H), screws (G) and
nuts with screw heads facing rear of deck.
Tighten nuts so that end of screw is
approximately flush with nut.
k. Adjust draper tension. Refer to Section 10.12.1
Draper Tension Adjustment.
K
L L
J
M
H
G
REAR OF DECK