MacDon FD70 for Combine Operators - Manual (Page 222)

SECTION 10. MAINTENANCE AND SERVICING
Form 169006
220
Revision D
10.17.3 Maintenance Record
ACTION:  - Check  - Lubricate  - Change
MA
IN
TEN
ANC
E
RECO
R
D
Hour Meter Reading
Date
Serviced By
FIRST USE Refer To Section 10.17.1 Break-In Inspections.
100 HOURS OR ANNUALLY

Auger to Pan and Feed Draper Clearance

Draper Seal

Gearbox Lubricant Level

Reel Drive Chain Tension

Reel Tine/Cutterbar Clearance

Sickle Drive Belt Tension

Wheel Bolt Torque

Wobble Box Lubricant Level

Wobble Box Mounting Bolts

Anti-Vibration Pivots

Auger Bearing

Auger Drive Chain

Auger Driveshaft Bearings

Flex Header Lower Linkage

Float Pivots

Float Spring Tensioners

Hydraulic Couplers

Reel Drive Chain

Upper Cross Auger RH Support
END OF SEASON Refer To Section 9.10 STORAGE.
10 HOURS OR DAILY
NOTE: A RECORD OF DAILY MAINTENANCE IS NOT
NORMALLY REQUIRED BUT IS AT THE
OWNER/OPERATOR’S DISCRETION.

Hydraulic Hoses and Lines

Sickle Assembly

Tire Pressure

Sections, Guards, Hold-downs
25 HOURS

Hydraulic Oil Level at Reservoir

Sickle Head(s)
50 HOURS

Draper Roller Bearings

Driveline and Driveline Universals

Sickle Drive Shaft Bearings (DK)

Wobble Box Oil - First 50 Hours Only
(continued next page)