MacDon FD70 for Combine Operators - Manual (Page 187)

SECTION 10. MAINTENANCE AND SERVICING
Form 169006
185
Revision D
10.13.2.2 Draper Installation
a. Insert draper into deck at outboard end, under the
rollers. Pull draper into deck while feeding it at
the end.
b. Feed in the draper until it can be wrapped around
the drive roller.
c. Similarly insert the other end into the deck over
the rollers. Pull draper fully into the deck.
d. Attach ends of draper with tube connectors (D).
e. Install screws (C) with heads facing the center
opening.
f. Adjust tension. Refer to Section 10.13.1 Header
Draper Tension Adjustment.
C
D