MacDon 871 Combine Adapter - Manual (Page 37)

37
Adapter Mounting Instructions
for John Deere Combines
ATTACHING ADAPTER TO COMBINE
1. Slowly drive combine up to adapter until lift lugs
(C) are directly under adapter top cross
member.
2. Raise feeder house to lift adapter, ensuring lift
lugs are properly engaged. Raise adapter fully.
WARNING: To avoid bodily injury or
death from unexpected start-up or
fall of raised attachment; stop
engine, remove key and engage lift cylinder
stop before proceeding with hook-up.
3. Engage lock pins (E) in adapter brackets, both
sides.
ALIGN LIFT LUGS UNDER ADAPTER FRAME
C
ENGAGE LOCK PINS - BOTH SIDES
E