Opticon OPL 9724 - Manual (Page 25)

GRAPHICAL DEMO APPLICATION - PAGE 25
3-3-2-3-2 Making a bluetooth connection with a mobile phone
To establish a bluetooth connection with a mobile phone, you’ll first need to set up your
mobile phone:
• Find the bluetooth option in the menu of your mobile phone
• Set the bluetooth option to: ON
Your mobile phone should now be ready to make a bluetooth connection
Before trying to connect to the mobile phone place the OPL9724 near your mobile phone
When establishing a bluetooth connection with a mobile phone, normally a message will
appear on your phone that you will have to enter a pin code to accept the connection between
the OPL9724. (Unless you have entered a empty pin code in the system menu)
Enter the same pin code as you entered in your OPL9724 in the system menu.
If your mobile then asks to accept the connection with the OPL9724 again, press ‘ACCEPT’.
After you’ve done this, it’s possible that the application has already returned with an error,
because it took too long to connect. This is normal. The second time you connect to the
mobile phone you don’t have to enter the pin code again and you only have to press
‘ACCEPT’ on your mobile phone if your mobile phone asks to accept the connection.
3-3-2-3-2-2 Sending data using the GPRS network of the mobile phone
Before you try to establish a bluetooth connection using the GPRS network make
sure your mobile phone has a working GPRS subscription.
The advantage of using the GPRS network is that you don’t have to enter a telephone
number, username and password of an ISP server. Besides this, establishing a
GPRS connection will go much faster then establishing a connection with ISP server
using the GSM network.
3-3-2-3-2-2-2 Sending the data file the remote FTP server using GPRS
After establishing the GPRS connection the software will try to connect to a remote
FTP server, by using its IP-address, a username and a password. The data file will be
placed in the root-directory of the FTP-server.
3-3-2-3-2-2-3Email the data the remote SMTP server using GPRS
After establishing the GPRS the software will try to connect to a remote SMTP server,
by using its IP-address, the senders-email address and the recipients emails address.
Before connecting to the SMTP server a connection with a POP-server is first made
to let the OPL9724 authenticate itself at the mail-server. To do this the IP-address of
the POP-server and a valid username and password needs to be specified as well.
3-3-2-3-2-3 Sending data using the GSM network of a mobile phone
Sending data using the GSM network of a mobile can be compared with sending data
using a wireless modem. This has the advantage that is possible to dial-in to a remote
modem or server at almost any location. The disadvantage of using a mobile GSM
connection is that it’s usually much slower then a serial modem (normally 9600bps)