Opticon OPL 9724 - Manual (Page 24)

GRAPHICAL DEMO APPLICATION - PAGE 24
3-3-2-3 Making a bluetooth connection
A connection between the OPL9724 and a bluetooth device, like mobile phones or PC's with
a bluetooth adapter, can be established by taken the following steps.
The first step of setting up a connection between the OPL9724 and the bluetooth device is by
making sure the bluetooth device is ‘discoverable’. Otherwise the OPL9724 can’t find the
bluetooth device.
The second step of setting up a bluetooth connection is to let the OPL9724 discover the other
device. This should done as follows:
• Go to the system menu of your OPL9724 by pressing all three buttons at the same time.
• Scroll down the system menu to the option: ‘Input address’ and select this option.
• In this menu, choose ‘Q2 discover’ (or choose Q1 to enter the address of the bluetooth
device manually)
• The OPL9724 will now start to search for bluetooth devices that are nearby, so make sure
the OPL9724 is near the bluetooth device. This process will take about half a minute
•
After this process you will be asked to select one of the discovered bluetooth devices.
Choose your bluetooth device. (Which should be in the list, otherwise your bluetooth
device wasn’t activated or was incorrectly configured)
The next step of setting up a connection between the OPL9724 and a bluetooth device is
setting the bluetooth PIN-Code of your OPL9724. This should done as follows:
• Go to the system menu of your OPL9724 again
• Scroll down the system menu to the option: ‘Input PINcode’ and select this option.
• At this point you’ll be asked to enter the pin code. Using the navigation buttons to enter
the 4-digit pin code you would like to use. (i.e. 0000…….).
If you don’t wish to use a pin code, just clear the complete line with dots only.
• Press the trigger key to confirm the entered pin code.
The OPL9724 bluetooth module should now be ready to connect with your bluetooth device.