Barco R9002327 - Manual (Page 9)

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS
1-6 1-6
SAFETY
INSTRUCTIONS
SAFETY
INSTRUCTIONS
5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498
c. If the product has been exposed to rain or water.
d. If the product does not operate normally when the operating instructions are
followed. Note :
Adjust only those controls that are covered by the operating instructions since
improper adjustment of the other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a need for
service.
Replacement parts - When replacement parts are required, be sure the service
technician has used original BARCO replacement parts or authorized replacement
parts which have the same characteristics as the BARCO original part. Unauthor-
ized substitutions may result in degraded performance and reliability, fire, electric
shock or other hazards. Unauthorized substitutions may void warranty.
Safety check - Upon completion of any service or repairs to this projector, ask the
service technician to perform safety checks to determine that the projector is in
proper
operating condition.
On cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
- To keep the cabinet looking brand-new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with mild detergent
solution. Never use strong solvents, such as thinner or benzine, or abrasive
cleaners, since these will damage the cabinet.
- To ensure the highest optical performance and resolution, the projection lenses
are specially treated with an anti-reflective coating, therefore, avoid touching
the lens. To remove dust on the lens, use a soft dry cloth. Do not use a damp cloth,
detergent solution, or thinner.
On re-packing
Save the original shipping carton and packing material; they will come in handy if
you ever have to ship your equipment. For maximum protection, re-pack your set
as it was originally packed at the factory.
On illumination
In order to obtain the best quality for the projected image, it is essential that the
ambient light which is allowed to fall on the screen be kept to an absolute minimum.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally when the operating instructions are
followed. Note :
Adjust only those controls that are covered by the operating instructions since
improper adjustment of the other controls may result in damage and will often require
extensive work by a qualified technician to restore the product to normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a need for
service.
Replacement parts - When replacement parts are required, be sure the service
technician has used original BARCO replacement parts or authorized replacement
parts which have the same characteristics as the BARCO original part. Unauthor-
ized substitutions may result in degraded performance and reliability, fire, electric
shock or other hazards. Unauthorized substitutions may void warranty.
Safety check - Upon completion of any service or repairs to this projector, ask the
service technician to perform safety checks to determine that the projector is in
proper
operating condition.
On cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
- To keep the cabinet looking brand-new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with mild detergent
solution. Never use strong solvents, such as thinner or benzine, or abrasive
cleaners, since these will damage the cabinet.
- To ensure the highest optical performance and resolution, the projection lenses
are specially treated with an anti-reflective coating, therefore, avoid touching
the lens. To remove dust on the lens, use a soft dry cloth. Do not use a damp cloth,
detergent solution, or thinner.
On re-packing
Save the original shipping carton and packing material; they will come in handy if
you ever have to ship your equipment. For maximum protection, re-pack your set
as it was originally packed at the factory.
On illumination
In order to obtain the best quality for the projected image, it is essential that the
ambient light which is allowed to fall on the screen be kept to an absolute minimum.