Barco R9002327 - Manual (Page 32)

POWER CONNECTION POWER CONNECTION
6-2
POWER
CONNECTION
6-2
POWER
CONNECTION
5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498
Power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the
female power connector into the male connector at the front of the projector.
Input power (mains) voltage.
Power (mains) cord connection
Use the supplied power cord to connect your projector to the wall outlet. Plug the
female power connector into the male connector at the front of the projector.
Input power (mains) voltage.
See installation instructions before
connecting to the supply
V NOM 120/230 Volt
I MAX 5/2.5 AMP
FREQ 60/50 Hz
OFF ON
See installation instructions before
connecting to the supply
V NOM 120/230 Volt
I MAX 5/2.5 AMP
FREQ 60/50 Hz OFF ON
See installation instructions before
connecting to the supply
V NOM 120/230 Volt
I MAX 5/2.5 AMP
FREQ 60/50 Hz
OFF ON
See installation instructions before
connecting to the supply
V NOM 120/230 Volt
I MAX 5/2.5 AMP
FREQ 60/50 Hz OFF ON
Attention
The BARCOVISION 708 - R9002327 and R9002328 leave the factory to operate on
a mains (power) input of 120 Vac.
Attention
The BARCOVISION 708 - R9002327 and R9002328 leave the factory to operate on
a mains (power) input of 120 Vac.
Fuses
Warning
For continued protection against fire hazard :
- replace with the same type of fuse
- refer replacement to qualified service personnel
Fuse type : 2 x T5A/250V (Barco order number : R314104)
Fuses
Warning
For continued protection against fire hazard :
- replace with the same type of fuse
- refer replacement to qualified service personnel
Fuse type : 2 x T5A/250V (Barco order number : R314104)