Barco R9002327 - Manual (Page 8)

SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS
SAFETY
INSTRUCTIONS
1-5
SAFETY
INSTRUCTIONS
1-5 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 200498
3. Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
4. If an extension cord is used with this product, make sure that the total of the
ampere ratings on the products plugged into the extension cord does not exceed
the extension cord ampere rating. Also make sure that the total of all products
plugged into the wall outlet does not exceed 15 amperes.
5. Never push objects of any kind into this product through cabinet slots as they
may touch dangerous voltage points or short out parts that could result in a risk
of fire or electrical shock.
Never spill liquid of any kind on the product. Should any liquid or solid object fall into
the cabinet, unplug the set and have it checked by qualified service personnel
before resuming operations.
6. Lightning - For added protection for this video product during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it from the
wall outlet. This will prevent damage to the projector due to lightning and AC power-
line surges.
On installation
1. Do not place this equipment on an unstable cart, stand, or table. The equipment
may fall, causing serious damage to it.
2. Do not use this equipment near water.
3. Slots and openings in the cabinet and the back or bottom are provided for
ventilation; to ensure reliable operation of the projector and to protect it from
overheating, these openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should never be placed near or over a radiator or heat register. This
projector should not be placed in a built-in installation or enclosure unless proper
ventilation is provided.
On servicing
Do not attempt to service this equipment yourself, as opening or removing covers
may expose you to dangerous voltage potential and risk of electric shock!
Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
3. Do not allow anything to rest on the power cord. Do not locate this product where
persons will walk on the cord.
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
4. If an extension cord is used with this product, make sure that the total of the
ampere ratings on the products plugged into the extension cord does not exceed
the extension cord ampere rating. Also make sure that the total of all products
plugged into the wall outlet does not exceed 15 amperes.
5. Never push objects of any kind into this product through cabinet slots as they
may touch dangerous voltage points or short out parts that could result in a risk
of fire or electrical shock.
Never spill liquid of any kind on the product. Should any liquid or solid object fall into
the cabinet, unplug the set and have it checked by qualified service personnel
before resuming operations.
6. Lightning - For added protection for this video product during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it from the
wall outlet. This will prevent damage to the projector due to lightning and AC power-
line surges.
On installation
1. Do not place this equipment on an unstable cart, stand, or table. The equipment
may fall, causing serious damage to it.
2. Do not use this equipment near water.
3. Slots and openings in the cabinet and the back or bottom are provided for
ventilation; to ensure reliable operation of the projector and to protect it from
overheating, these openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should never be placed near or over a radiator or heat register. This
projector should not be placed in a built-in installation or enclosure unless proper
ventilation is provided.
On servicing
Do not attempt to service this equipment yourself, as opening or removing covers
may expose you to dangerous voltage potential and risk of electric shock!
Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.