Barco R9002327 - Manual (Page 53)

APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT
APPENDIX
B
: G2
ADJUSTMENT
B-1
APPENDIX
B
: G2
ADJUSTMENT
B-1 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 0200498
G2 adjustment
Enter the adjustment mode by pressing
ADJUST and highlight Service. Press
ENTER to start up the service mode.
ENTER starts up the service mode.
EXIT returns to operational mode.
Highlight 'Common settings' and press
ENTER.
ENTER starts up the Common settings
menu.
EXIT returns to the adjustment mode
menu.
Highlight G2 adjust and press ENTER.
A safety notice will be displayed to
warn the operator.
If you are qualified, press ENTER to
Select with or
then
to return.
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
Select with or
then
to return.
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
G2 adjustment
Enter the adjustment mode by pressing
ADJUST and highlight Service. Press
ENTER to start up the service mode.
ENTER starts up the service mode.
EXIT returns to operational mode.
Highlight 'Common settings' and press
ENTER.
ENTER starts up the Common settings
menu.
EXIT returns to the adjustment mode
menu.
Highlight G2 adjust and press ENTER.
A safety notice will be displayed to
warn the operator.
Select with or
then
to return.
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I²C DIAGNOSTICS
Select with or
then
to return.
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
Select with or
then
to return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
Source 1
Select with or
then
to return.
ADJUSTMENT MODE
Select a path from below :
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
IRIS
Source 1