Barco R9002327 - Manual (Page 55)

APPENDIX B : G2 ADJUSTMENT APPENDIX B : G2 ADJUSTMENT
APPENDIX
B
: G2
ADJUSTMENT
B-3
APPENDIX
B
: G2
ADJUSTMENT
B-3 5975069A BARCOVISION 708 200498 5975069A BARCOVISION 708 0200498
- Adjust the G2 potentiometers very slowly with a screwdriver until
the corresponding LED just stops illuminating. Repeat the adjust
ment for the other colors.
- Once the three G2 potentiometers have been correctly adjusted,
close the upper electronic chassis and secure with the retaining
screws.
Green G2 LED
Picture of the green LED. The other LED's are mounted in the same
neighbourhood.
- Adjust the G2 potentiometers very slowly with a screwdriver until
the corresponding LED just stops illuminating. Repeat the adjust
ment for the other colors.
- Once the three G2 potentiometers have been correctly adjusted,
close the upper electronic chassis and secure with the retaining
screws.
Green G2 LED
Picture of the green LED. The other LED's are mounted in the same
neighbourhood.