Multiquip MG30M2D - Manual (Page 44)

PAGE 44 — MAYCO MG-30 PUMP — OPERATION AND PARTS MANUAL — REV. #3 (09/15/11)
MG-30 PUMP — TOWING GUIDELINES
Figure 44. Pump Safety Chain
and Coupler (Mobil Unit)
CAUTION:
DO NOT tow the pump unless the mixing drum
and hopper are
completely empty.
4. Make certain the wheel lug nuts and axle mounting
hardware are tight.
5. Check the tire pressure and overall condition of the tires.
6. ALWAYS make sure the dump handle and grill are
locked in place before towing.
Be sure to always cross safety chain
underneath pump frame. NOTE
Towing Instructions (Mobil Unit)
Before attempting to tow this pump , check the following:
1. ALWAYS close the fuel shut-off valve on the pump and
mixer before towing the pump to prevent possible fuel
leakage into the engine crankcase.
2. Securely attach the pump's towing coupler to the towing
vehicle's hitch as shown in Figure 44.
3. Attach both safety chains so that they cross underneath
the pump frame as shown in Figure 44.
2-INCH
TRAILER
HITCH
HAND WINCH
ADJUST TRAILER
HEIGHT
MG30-M2D
1-800
MAYCO
SAFETY CHAIN
MASTER LINK
CROSS BOTH
SAFETY CHAINS
IMPORTANT!
COUPLER
LOCK KNOB
2-INCH
TRAILER
COUPLER
SAFETY CHAIN
2 INCH BALL
PUMP
FRAME