MTS ReNew Technical Reference - Manual (Page 24)

ReNew Technical Reference 24 Installation
ReNew SMA system
connections
On Instron 4400 frames, the control cable (#2 above) plugs into the existing
handset connector. On Instron 5500 frames, an interface assembly (MTS# 100-
091-751) is installed in the electronics rack at the rear of the machine to accept
the control cable.
Cable Description MTS #
1 CABLE-USB V2.0 CABLE,A-B,3 METER/10 FOOT 100-096-419
2 CABLE ASSY,SMA RENEW 44/55 100-091-756
3 CABLE ASSY,ELITE L/C RENEW 100-091-797
3 CABLE ASSY,SMA RENEW 44/55 L/C 100-091-762
4 CABLE ASSY,RENEW GROUND 100-091-106
5 BOX ASSEMBLY-REMOTE POWER SWITCH 100-165-688
Cable Description MTS #
1 CABLE-USB V2.0 CABLE,A-B,3 METER/10 FOOT 100-096-419
2 CABLE ASSY,CHN IN-RENEW SMA/DA 100-091-747
3 CABLE ASSY,ELITE L/C RENEW 100-091-797