Memmert ICH 256 Climate Chambers (Generation 2003) - Manual (Page 51)

51
Advanced Functions
7. Advanced Functions
7.1 Printer
The cooled incubator is equipped with a parallel printer port as used in computers. Standard
PCL3 compatible inkjet printers with a parallel port (e.g. HP DeskJet 5550 or HP DeskJet 9xx)
can be connected to the printer interface on the rear of the appliance (see page 14 ).
Make sure that a shielded interface cable is used. The shielding must be connected to the plug
casing.
The controller has an internal log memory (see page 58 ). The log data can be printed out in
this mode via the connected printer.
If a colour printer is connected, the various graphs are printed out in colour.
On a printout, the GLP header is also printed automatically and contains the following details:
►
Date of printout
►
Period of log
►
Consecutive page numbers
►
Serial numbers and appliance name
Running the Running the printing function: printing function:
Select the PRINT operating mode with the push-
turn control, as described on page 27. By turning
the push-turn control and holding down the SET
key, the following parameters can be selected and altered one after another,
as described in chapter Basic operation on page 28 :
Querying the date of the first print page
Querying the date of the last print page
Leaving the print menu and returning to the main menu
PRINT SETUP