Memmert ICH 256 Climate Chambers (Generation 2003) - Manual (Page 21)

21
Delivery, Transport and Setting Up
3.3 Delivery
The cooled incubator is delivered in cardboard packaging on a pallet.
3.3.1 Unpacking and checking
1. Remove cardboard packaging or cut open carefully along an edge.
2. Check the delivery note to ensure that the delivery is complete.
3. Check the inside and outside of the cooled incubator for damage. If you notice deviations
from the delivery note, damage or irregularities, do not put the cooled incubator into
operation but inform the haulage company and the manufacturer.
4. Lift the cooled incubator off the pallet with a fork-lift truck or a manual pallet jack and
position it on the installation site.
5. Remove protective foil.
3.3.2 Disposing of packaging material
Dispose of the packaging material (cardboard, protective foil) in accordance with the legally
applicable disposal regulations for cardboard packaging in your country.
3.3.3 Storage after delivery
If the cooled incubator is initially to be stored after delivery: Read the storage conditions from
page 69 .