Leica Biosystems ANGLE TWO - Manual (Page 9)

Leica Angle Two ™ User Manual Rev A02 © Leica Biosystems Richmond Inc. 2010 9
3
Components
This chapter describes the parts of the Leica Angle Two ™ system and their functions.
The components are divided into the following sections:

“U Frame” on page 10 – includes the ear bars, nose clamp and incisor bar.

“Manipulator: Linear Movements” on page 13 – the three coarse drives that move the manipulator in the AP,
ML and DV directions and the fine drive for small movements in the DV direction.

“Manipulator: Tilt, Rotation and Swing-Out” on page 16 – how to tilt and rotate the probe, and swing-out
for moving the probe away in order to get clear access to the animal.

“Probe Shaft” on page 20 – how to change the shaft’s vertical and horizontal positions and attach a probe.

“Vernier Scales” on page 22 – how to use the vernier scales.

“Computer” on page 23 – lists the hardware and software provided.

“Ancillary Products” on page 23 – other products available from Leica Microsystems for stereotaxic surgery.