Leica Biosystems ST4040 - Manual (Page 41)

41 Leica ST4040 – Linear Stainer
6. Operation
6.11 Finishing work
• Once the last slide rack is removed, press ‘Start/Stop’.
• Close the ball valve.
Do not change the setting of the water tap, so that the adjusted tap
water flow rate remains unaltered!
• If necessary, add or exchange reagents.
.
• Cover the stations with the station lids.
• Close the lids.
• Leave the fan on, i.e.:
• Do not switch off the instrument via the ‘ON/OFF’ button or via the
mains switch.