Leica Biosystems ST4040 - Manual (Page 14)

14 Instruction Manual V 1.4 – 06/2009
3. Installation
3.4 Standard delivery ‘basic instrument’ and general accessories
3.4.1 Standard delivery
Basic instrument ST4040 - single load model
• Basic instrument with three-piece lid
• 27 Reagent stations, plastic
• 4 tap water stations, complete assy. with inlet valve
• 1 Drain hose for waste water, 2 m long
• 1 Tap water inlet hose, 2.50 m long,
complete with 3/4“ connection for water tap and replacement gasket
• 2 Lids for reagent stations
• 1 Cover for second row
• 1 Instruction manual ................................................................ 14 0474 80001
• 1 Tool set, including:
•
1 Single-ended open-jaw wrench, size 27
• 1 Single-ended open-jaw wrench, size 13
• 1 Screw driver, 5.5 x 200 mm
• 1 Screw driver, 3 x 50 mm
• 1 Water tap adapter for 1/2“ water taps
• 3 Disposable plastic films, solvent-resistant, for control panel
• 1 Set of power chords:
•
Euro
• UK
• USA
Basic instrument ST4040 - double load model (for double row staining)
To use a single load model for double row staining, order the appro-
priate number (may vary - depends on individual staining applica-
tions) of the accessories listed below (see chapter 3.4.2 - ‘General
accessories’ for details):
• Reagent stations
• Tap water stations
• Lids for reagent stations
• Slide racks
• Slide rack carriers