Leica Biosystems ST4040 - Manual (Page 28)

28 Instruction Manual V1.4 – 06/2009
4. Installation of the Optional Load/Unload Station
• Place grooved ramp no. 2 onto the rear pin
and use the hexagon key, size 1.5 to fasten
the two grub screws in the ramp (clockwise
rotation through about 180 °).
• Place plain ramp no. 2 onto the front pin and
fasten the front ramp (clockwise rotation of
both grub screws through about 180 ° -
hexagon key, size 1.5).
Store ramps no. 1 for future use!
To operate the instrument with Medite
/ Hacker or Sakura slide racks, the
standard guide ramps no. 1 for Leica
slide racks must be exchanged for
guide ramps no. 2 (see ‘Standard deliv-
ery - optional unload station’, chapter
4.3.2).
• Use the hexagon key, size 1.5 to unscrew
both ramps no. 1 loosening the two corre-
sponding grub screws in each ramp (coun-
terclockwise rotation through about 180 °).
Remove both ramps.
4.5 Changing the guide ramps for slide rack carriers
1
1
1
2
2
2