Leica Biosystems SM2500 - Manual (Page 27)

5.4.4 Rotary-type selector switch in area 2
9 The parameters in areas 2.2 and 2.4 are entered via the rotary selector
switch no. 9:
- Sectioning / milling thickness in μm
(section / milling feed via knife / miller)
- Preselection of number of sections / milling strokes
(to be carried out in ‘PROG’ mode)
- Retraction in μm
(= knife / miller retraction during specimen return stroke)
- Sledge speed - forward
(= sectioning / milling speed)
- Sledge speed - backward
(= return stroke speed)
9
5. Operation
Fig. 17
27 Leica SM2500