Landoll WFPC22-36 Wing Float Pulverizer - Manual (Page 38)

3-2 F-701
OPERATION
Unfolding the Wings
On level ground, unfold the wings completely. Make sure
the Wing Cylinders are extended completely and the
Transport Axle Cylinder is retracted.
NOTE
Wings should unfold first, then machine lowers. If not
reduce hydraulic fluid flow.
Adjust the Turnbuckle so that each Wing Roller is at the
lower 1/3 of its respective Guide Slot.
During field operations, it is not necessary to raise the
machine for turns, but turns should be made as wide as
possible.
NOTE
Prevent wheel breakage by reducing speed when
operating in rocky conditions.
Figure 3-2: Wing Cylinders
Turnbuckle
Guide Slot
Wing Roller
Transport
Cylinder
Wing Cylinder
FRONT