Kisan Electronics SN-5 - Manual (Page 26)

Page-24
RUNNING LIGHT OPTION:
This hook-up is for motorcycles with a SINGLE handlebar switch.
A single handlebar switch latches to
the right or to the left. The actuating
mechanical lever may come back to
the center, but the electrical switch
remains latched and connected to
complete the circuit.
That’s why you have to push-to-reset
or push-to-cancel.
Moreover, they are dual-pole type
switches. So whenever you activate
right or left signal: the marker light is
disconnected and simultaneously the
bright filament of the turn signals for
that side is connected.
Hooking-up this option will
establish two separate channels,
thus allowing signalMinder to
continue flashing even after the
handlebar switch is returned to
neutral.
signalMinder automatically detects two
separate channels established by
hooking-up this option. It is no longer
limited with the single channel.
Consequently, signalMinder can now
execute programs for:
„ 4-Way emergency flash and escort-
mode side-to-side flashing.
„ Automatic reset of handlebar switch
by using return springs
NOTE! If you experience static interference in headsets or radio, use
DIP Switch#1 to turn off the running lights.