Kisan Electronics SN-5 - Manual (Page 23)

Page-21
SM-5 INSTALLATION:
† Delphi
† BMW
(61.31-2 306-979)
On most RT models, you
can locate the turn signal
flasher simply by removing
the seat and locating it within the relay box.
On other models, the relay box is located under the gas tank towards the
front or behind the front fairing. Refer to your bike’s Manual, or the Wiring
Diagram to find its location.
signalMinder is slightly larger than the original relay, so it may not fit in the
same compartment of the fuse box. In that case, utilize any unused
compartment by moving the 12-pin connector to that location and then plug
the signalMinder in. Secure it with supplied Velcro strip.
ON-THE-FLY PROGRAMMIMG TIME-OUT
Push and HOLD LEFT
Turn signal switch button
Then turn the
Ignition ON
45 Seconds
Push and HOLD RIGHT
Turn signal switch button
Then turn the
Ignition ON
30 Seconds
Push and HOLD CANCEL
Turn signal switch button
Then turn the
Ignition ON
8 Seconds
When you PUSH and HOLD any of the turn signal switches and then turn
the Ignition ON, the turn signal lamps will light up to validate setting change.
1
st
Time Low Intensity
2
nd
Time Turn Lights Off
ADJUSTING RUNNING LIGHT
INTENSITY
Push and HOLD CANCEL
Then push Emergency 4-way button
3
rd
Time High Intensity
To install other optional features, please refer to:
„ Brake Input Option
„ VL-10 vectraLIGHT plug-in ports
Enhance your visibility! – Use all available features.
TYPICAL LOCATION