Sm-6 – Kisan Electronics SN-5 User Manual
Page 24
Page-22
SM-6
SM-6 Application:
K-series BMWs – older models
R-series BMWs – European models
Running Light Conversion option:
- (3) selectable levels
LANE CHANGER Hold the turn signal switch to initiate quick flash of
initial cycle (5 flashes) – very effective!
QUICK CANCEL Tap the same turn signal switch second time to stop
flashing - quick & easy!
Built-in driver ports for vectraLIGHT - mirror mounted LED array with
SEQUENTIAL flash, Running lights and Brake override.
Some of the BMWs do not have the 4-
Way emergency switch, which is
required to adjust Running Light
intensity. A push-button switch can be
added as shown here, to allow pin#15 to
go to ground.
Brake Input wire on BMWs is: Gray
with Yellow stripe.
Typical Model for SM-6