Sm-5 – Kisan Electronics SN-5 User Manual
Page 22
Page-20
SM-5
SM-5 Application:
All newer R-series BMWs (US version)
Also newer K-1200 BMWs
Running Light Conversion option:
- (3) selectable levels
LANE CHANGER Hold the turn signal switch to initiate quick flash of
initial cycle (5 flashes) – very effective!
QUICK CANCEL Tap the same turn signal switch second time to stop
flashing - quick & easy!
Built-in driver ports for vectraLIGHT - mirror mounted LED array with
SEQUENTIAL flash, Running lights and Brake override.
The harness connector has a cam-lock.
You can release it by pulling-out the “U”
shaped latch and rotating it over the
connector. DO NOT pull on the wires.
Once the cam-lock is released, the
connector slides out easily.
Brake Input wire on BMWs is: Gray with
Yellow stripe.
Typical Model for SM-5