JUMO 902910 CANtrans T RTD Temperature Probe with CANopen Output Operating Instructions - Manual (Page 30)

30
8 Programming examples
8.1 General
You can compile simple CAN messages yourself and transmit them to the
individual CAN devices by using the free PCANView program (supplied by
Peak, www.peak-system.com).
8.2 Function
To start with, you will be asked to select the baud rate. It can be set by
choosing one of the values displayed in the program window.
The default setting for the JUMO CANtrans transmitters as delivered is
500kbit/sec.
8.3 Testing the connection
After switching on the transmitter (power-on), you will see a message (bootup
message) in the Receive field, which is transmitted for test purposes by all
CANopen devices after switch-on.
The program then gives you the option of entering CAN messages via the
Transmit folder, in the sub-item New transmit message. The following window