JUMO 902910 CANtrans T RTD Temperature Probe with CANopen Output Operating Instructions - Manual (Page 27)

27
7 Object dictionary
0x2002 - UINT16 RW 1 EMCY_Time Time for cyclic trans-
mission of error
messages 0 — 65535 msec
0 = once
ex-fact. 1000 msec
0x3100 0x01 float RO Al PV Min 1 Drag pointer
minimum value
0x02 float RO Al PV Min 2 as subindex 0x01, for
devices with 2 sensors
0x3101 0x01 float RO Al PV Max 1 Drag pointer
maximum value
0x02 float RO Al PV Max 2 as subindex 0x01, for
devices with 2 sensors
0x3102 0x01 UINT32 WO Al Reset Min-
Max 1 Reset drag pointers
0x3100 and 0x3101 Reset with "roeb" =
0x62656F72
0x02 UINT32 WO Al Reset Min-
Max 2 as subindex 0x01, for
devices with 2 sensors
0x3400 - String
(4) RW Al Customer
Date any text,
4 bytes,
e.g. date ex-factory: "0003"
0x3401 - String
(4) RW Al Customer
Name any text,
4 bytes,
e.g. name ex-factory: "ROEB"
0x6124 0x01 float RW Al Offset 1 Customer fine
calibration ex-factory: 0
0x02 float RW Al Offset 2 as subindex 0x01, for
devices with 2 sensors
0x6125 0x01 UINT32 WO Al Autozero With pressure sensors
only:
show current pressure
as zero, alters object
0x6124,1 Set to zero with
“zero” =
0x6F72657A
0x6126 0x01 float RW Al Scaling
Factor 1 Scaling of factor ex-factory: 1
e.g. 0.1, to show
pressure not as
0 — 100% but as
0 — 10 bar; or e.g.
1.8, to show tempe-
rature not in °C but
in °F.
0x02 float RW Al Scaling
Factor 2 as subindex 0x01, for
devices with 2 sensors