JUMO 902940 DELOS T Electronic Temperature Switch with Display and Analog Output Operating Manual - Manual (Page 59)

59
6 Commissioning/start-up
6.13 Setting the switching point (B.Sp)
 Chapter 6.12 "Setting the switching function (B.Fct)", page 55
How to proceed:
Setting range: Measuring range ( > B.RSp)
Factory-setting: 100 °C
Step Activity
1 Unlock the device.
 Chapter 6.2 "Unlocking the device (enter the code).", page 42
2 "Turn" until "B.Sp" appears in the bottom line.
3 "Press"
TIP!
The value is entered "digit-by-digit“!