JUMO 902940 DELOS T Electronic Temperature Switch with Display and Analog Output Operating Manual - Manual (Page 19)

19
2 Device identification
2.4.1 Scope of delivery for basic type 902940/50
Our scope of delivery includes:
•
1 device in the version ordered
• 1 combination tool
(required for operation on the device and to turn the display case through
± 160°)
• 1 operating instructions B 90.2940.0
In the event of questions, please contact your supplier.
2.4.2 Accessories for basic type 902940/50
The following articles must be ordered separately and with costs:
Article Part No.
Setup program on CD-ROM, multilingual 90/00550018
PC interface with USB/TTL converter and adapter (USB connection line)
(required for the configuration with the setup program) 70/00456352
Connection line (Y cable)
(required for the configuration with the setup program) 40/00507861
Combination tool
(required for operation on the device and after installation
to turn the display case through
± 160° to the LH or RH side)
40/00526614
Cable box, 4-pin (straight) M 12x1 with PVC connection line length 2000 mm
(can be used for individual assembling) 40/00404585
Cable box, 4-pin (angled) M 12x1 with PVC connection line length 2000 mm
(can be used for individual assembling) 40/00409334
Machine connector M 12x1, 4-pin as per IEC 60947-5-2 90/00404727
Wall holder for DELOS T with M 12x1 connector 90/00555129
Push-in RTD temperature probe with Pt1000 temperature probe
and machine connector M 12x1
902150/99-386-1006-2-6-100-56-2500/315
Sheath diameter 6 mm, fitting length 100 mm,
connection cable length 2500 mm 90/00551310
Push-in RTD temperature probe with Pt1000 temperature probe
and machine connector M 12x1
902150/99-386-1006-2-6-200-56-2500/315
Sheath diameter 6 mm, fitting length 200 mm,
connection cable length 2500 mm 90/00551311