JUMO 902940 DELOS T Electronic Temperature Switch with Display and Analog Output Operating Manual - Manual (Page 14)

2 Device identification
14
2.2.1 Scope of delivery for basic type 902940/10
Our scope of delivery includes:
•
1 device in the version ordered
• 1 combination tool
(required for operation on the device and to turn the display case through
± 160°)
• 1 operating instructions B 90.2940.0
In the event of questions, please contact your supplier.
2.2.2 Accessories, process connection for basic type 902940/10
The following articles must be ordered separately and with costs:
2.2.3 Accessories for basic type 902940/10
The following articles must be ordered separately and with costs:
Article Part No.
Pipe screw connection G 1/4 (stainless steel 316Ti) for sheath screw connections 90/00080811
Pipe screw connection G 1/2 (stainless steel 316Ti) for sheath screw connections 90/00305445
Article Part No.
Setup program on CD-ROM, multilingual 90/00550018
PC interface with USB/TTL converter and adapter (USB connection line)
(required for the configuration with the setup program) 70/00456352
Connection line (Y cable)
(required for the configuration with the setup program) 40/00507861
Combination tool
(required for operation on the device and after installation
to turn the display case through
± 160°to the LH or RH side)
40/00526614
Cable box, 4-pin (straight) M 12x1 with PVC connection line length 2000 mm
(can be used for individual assembling) 40/00404585
Cable box, 4-pin (angled) M 12x1 with PVC connection line length 2000 mm
(can be used for individual assembling) 40/00409334