JUMO 707060 Wtrans B - Programmable Head Transmitter with Radio Transmission Operating Manual - Manual (Page 33)

33
7 Setup program
Establishing the communication without using the assistant
How to proceed:
7.4.2 Reading the current probe parameters
How to proceed:
7.4.3 Editing probe parameters
How to proceed:
Step Activity
1 Start the setup program.
2 Select the "Establish connection" function in the "Data transfer” menu.
The device list containing all devices entered is mapped in.
3 Select the desired probe by clicking with the left mouse key.
4 Click on the "Connect" button.
The device list is closed, the assistant terminated and the communication between
probe and setup program established.
Step Activity
1 In the "File" menu select the "New" function.
The "Device assistant” starts.
2 Confirm the "User-defined setting" by pressing the "Continue" button.
3 Select the "Frequency band" and confirm with "Continue".
4 Select the receiver variant and confirm by pressing "Continue".
5 Exit the overview of the selected settings by pressing "Finish".
The current settings are displayed in the setup program.
6 Select the desired probe from the navigation tree by clicking with the left mouse key.
7 In the "Data transfer" menu select the "Data transfer from device" function.
8 Exit the inquiry "Save file" by selecting "Skip".
The current probe parameters are downloaded to the setup program.
Step Activity
1 Select the probe to be edited from the navigation tree by double clicking with the left
mouse key.
The "Probe configuration" is opened.
2 Edit the desired parameters.
3 Confirm editing with "OK”.
4 Save the parameters in the "File” menu with the "Save” function.