beautypg.com

3 establishing the connection between pc and probe, Establishing the connection between pc and probe, 7 setup program – JUMO 707060 Wtrans B - Programmable Head Transmitter with Radio Transmission Operating Manual User Manual

Page 29

background image

29

7 Setup program

7.3

Establishing the connection between PC and probe

The connection between probe and PC is established via a PC interface TTL/RS232 converter
and adapter (socket) or USB/TTL converter and adapter (socket).

CAUTION!
Permanent interface operation!
The PC interface TTL/RS232 converter or USB/TTL converter is only designed for a time-lim-
ited interface connection.
Please ensure that the interface connection is disconnected and the probe correctly closed
once the setup data transfer is completed.

CAUTION!
Disconnect and remove the voltage supply!
Malfunctions can occur, if the connection between battery and transmitter is disconnected
while the setup connector is still connected.
Do not disconnect the battery from the transmitter as long as the setup connector is still con-
nected.

CAUTION!
Low battery!
A low battery can lead to interface problems and result in an incorrect configuration or data
loss.
Please ensure that the battery used for the connection between PC and probe never reaches
the "Low battery" status.