JULABO LC 6 Programmable Controller - Manual (Page 32)

Menu functions
32
8.4. Integrated programmer
The integrated programmer allows any desired temperature
program sequences to be realized. Such a temperature
sequence is called profile. A profile consists of individual
sections defined by duration (t:) and target temperature.
Target temperature is the setpoint (T:), that is achieved at the
end of a section. The programmer uses time and temperature
difference values within a section to calculate a temperature
ramp.
 Press enter
to select the submenu „Int. Programmer“.
 Use de up/down cursor keys
to select the
desired option. Then press enter to open.
A flashing segment indicates that a number or value needs
to be entered.
Edit Compile
profiles
Display sections
Delete Delete sections
Print Print a programmed profile
Set clock Set the real time on the programmable
controller
Examples:
Setting the clock
The integrated clock provides the flexibility to start a profile at
any date and time. The clock is preset at the JULABO factory.
 Lines 1 to 3:
Check for correctness of the preset date and time and
correct if necessary.
The time is diplayed permanently in line 4.
 Use the numerals to set time, date and year and set each
entry with enter .
 Press escape
to return to the previous menu level.