JULABO LC 6 Programmable Controller - Manual (Page 12)

Safety notes for the user
12
attachment.
 Observe the limited working temperature range when using plastic bath tanks.
 Do not stay in the area below the unit.
 Make sure you read and understand all instructions and safety precautions
listed in this manual before installing or operating your unit.
 Check the filling level of the bath fluid from time to time. The heater must
always be fully covered with the bath fluid!
 Never operate the unit without bath fluid in the bath.
 Never operate damaged or leaking equipment.
 Always turn off the unit and disconnect the mains cable from the power source
before performing any service or maintenance procedures, or before moving
the unit.
 Transport the unit with care.
 Sudden jolts or drops may cause damage in the interior of the unit.
 Always empty the bath before moving the unit.
 Never operate equipment with damaged mains power cables.
 Observe all warning labels.
 Never remove warning labels.
 Always turn off the unit and disconnect the mains cable from the power source
before cleaning the unit.
 Repairs are to be carried out only by qualified service personnel.
 Some parts of the bath cover may become extremely warm during continuous
operation. Therefore, exercise particular caution when touching these parts.
Use safety glasses!