JULABO FC600-T Recirculating cooler - Manual (Page 44)

Menu functions
44
ACTUAL SET

Set the external programmer to the lowest temperature
value.

In the calibration level, select the item AdP and set
the lowest temperature value (example: -20 °C).
 Press the setpoint key (E).
Follow the instructions under section 6.3.1.
page 27.




Do not alter any setting on either of the units as long as
the display "Ad_P" is blinking.

The lowest programmer value of -20 °C, and the
highest value of 80 °C correspond now to the
respective values of the recirculating cooler.
Example:
Programmer
Recirculating cooler
-99.9 °C -20 °C
- 50 °C -10 °C
0 °C 0 °C
50 °C 10 °C
100 °C 20 °C
200 °C 40 °C
300 °C 60 °C
400 °C 80 °C