JULABO FC600-T Recirculating cooler User Manual
Page 27

Recirculating coolers
27
6.3.
Setting the setpoint temperatures
Set the setpoints before or after starting the unit.
Press the setpoint keys (E, F, G, H) to set a value and
press the Enter key to store the value.
The values will stay in memory when the recirculating
cooler is powered down.
6.3.1. Setting the temperature
Example: Setting the bath temperature
ACTUAL
SET
ACTUAL
SET
Press the setpoint key
.
The indicator light blinks and the value previously set
appears on the MULTI-DISPLAY (LED) (example: -
10.8 °C)..
Use the cursor keys
to move left or right on
the display until the numeral you wish to change is
blinking.
Use the increase/decrease arrows
to change
the selected numeral (-, 0, 1, 2, 3, ... 9).
Press enter
to store the selected value
(example: -8.0 °C).
- FC1200-T Recirculating cooler FC1600-T Recirculating cooler FCW2500T Recirculating cooler FCW1600T Recirculating cooler FCW1200T Recirculating cooler FCW1600S Recirculating cooler FCW1200S Recirculating cooler FC1600T Recirculating cooler FC1200T Recirculating cooler FC1600S Recirculating cooler FC1200S Recirculating cooler