JULABO FC600-T Recirculating cooler - Manual (Page 38)

Remote control
38
Command Parameter Response of recirculating cooler
out_sp_00
in_sp_00 xx.x
no Set working temperature value
Ask for working temperature value
in_sp_01 no Ask for high temperature value
in_sp_02 no Ask for low temperature value
out_sp_03
in_sp_03 xxx
no Set control ratio for feed/return flow temperature
Ask for actual control ratio
out_sp_07
in_sp_07 xx.xx
xx.xx Maximum value of the internal temperature in case of
external control (HL - High Limit)
out = set; in = ask
out_sp_08
in_sp_08 xx.xx
xx.xx Minimum of the internal temperature in case of external
control (LL - Low Limit)
out = set; in = ask
in_pv_00 no Ask for actual feed temperature
in_pv_01 no Ask for actual temperature of external sensor
in_pv_02 no Ask for actual heater capacity
in_pv_03 no Ask for actual return temperature
in_pv_04 no Ask for actual safety temperature
out_par_06
in_par_06 x:x
x:x Control parameter Xp of the internal controller
out = set; in = ask
out_par_07
in_par_07 xx.xx
xx.xx Control parameter Tn of the internal controller
out = set; in = ask
out_par_08
in_par_08 xx.xx
xx.xx Control parameter Tv of the internal controller
out = set; in = ask
out_par_09
in_par_09 xx.xx
xx.xx Control parameter Xp of the external controller
out = set; in = ask
out_par_10
in_par_10 xx.xx
xx.xx Control parameter Xpu of the cascaded P-controller in case
of external control
out = set; in = ask
out_par_11
in_par_11 xx.xx
xx.xx Control parameter Tn of the external controller
out = set; in = ask
out_par_12
in_par_12 xx.xx
xx.xx Control parameter Tv of the external controller
out = set, in = ask